Kbc-networks H.264 Encoder Bedienungsanleitung PDF herunterladen (Seite 7)

Encoder User Manual

Manual-H264_ENC-Rev1207A

www.kbcnetworks.com

2.2.2 Left Side View

Item

Connection Detail

8a Connect to camera before powering

encoder

9b RX- Connect to Camera RX- in 4-wire set up

9c RX+ Connect to Camera RX+ in 4-wire set

9d TX- Connect to Camera RX- in 2-wire set up

9e TX+ Connect to Camera RX+ in 2-wire set

10f Switches 1~4 OFF shown in diagram

10g Switches 5~8 ON shown in diagram

2.2.3 RS Protocol Dip Switch Selection

2.2.3.1 RS-422 / 485

The default configuration is set for RS-422 / 485. In the diagram below, white

represents the switch. The first four dip switches OFF (in the up position) with the

last four ON will set the encoder for RS-422 or 485 protocol.

Note: The dip switches will not determine the Baud Rate. The Baud Rate must be

configured within the GUI to match the decoder, camera and PTZ system. The

default configuration is 9600 BPS.

2.2.3.2 RS-232

The reverse dip switch positions (i.e. first four ON/down and second four OFF/up)

will change the encoder into RS-232 mode.

8. Video In BNC

9. RS Data Input

10. RS Data Selector Switch

Default Configuration: RS-485/422 (shown)

1 2 3 4 5 6 7 8

a b c d e

1 2 3 4 5 6 7 8 9 10 11 12 ... 48 49

Keine Kommentare

Kbc-networks H.264 Encoder Bedienungsanleitung Seite 7