Kbc-networks H.264 Encoder Bedienungsanleitung PDF herunterladen (Seite 1)

Introduction

Welcome to KBC Networks’ Quick Start Guide for

the H.264 encoder. This document provides

some quick tips on how to get up and running.

For more detailed information see the Downloads

section below.

Features:

• H.264 or MPEG4 selectable compression

encoding

• NTSC/PAL support

• RS-485/422, 232 support

• DI/DO bi-directional contact closure

• Compatibility with KBC MPEG4 decoder in

MPEG4 mode

Downloads

Installation manual

Other features and functions are described in the

unabridged manual:

http://www.kbcnetworks.com/ip-

encoder/network-products/ip-encoder

Specification sheet:

http://www.kbcnetworks.com/ip-

encoder/network-products/ip-encoder

IP utility:

http://www.kbcnetworks.com/specification-

downloads/software

System Contents

Qty

Description

1 H.264/MPEG4 selectable encoder

1 12 Vdc 1500mA power supply

Note: The encoder is not 802.3af / at PoE compliant and

must be powered using the supplied 12Vdc

transformer

Equipment Required for Physical

Deployment

• Ethernet Cat5 or Cat6 straight-through

cable

• Coaxial cable

• Twisted pair for RS-422/485/232 data

connection

Note: To connect to a KBC decoder, a computer will be

needed to configure the encoder to MPEG4.

Default Settings

IP Address (Static): 192.168.1.100

GUI Access User Name: admin

GUI Access Password: admin

Encoder Type: H.264

Note: If the unit is hard reset to defaults the IP address will

change to dynamic 192.168.0.100 and the ID and

password to access the GUI will be Admin / 123456

Accessing the Encoder

If your computer is set to a static IP on the same

subnet as the encoder, its web browser interface

can be accessed using Internet Explorer (Version

6.0 or above) at http://192.168.1.100 or via the

IP utility link (tool available on the KBC website,

see downloads section of this quick start guide).

Note: Microsoft Internet Explorer v6.0 and above is the

only web browser supported

Quick Start

Guide

ENC-H-W*

H.264 Encoder

QSG-Encoder_H264-Rev1206E www.kbcnetworks.com

Solid black wire (no white stripe) to GND terminal

Wire with white stripe to 12V terminal

1 2

Quick Start 1
Quick Start Guide 2

Inhaltsverzeichnis

Seite 1 - Quick Start

Introduction Welcome to KBC Networks’ Quick Start Guide for the H.264 encoder. This document provides some quick tips on how to get up and running.

Seite 2 - Quick Start Guide

Configuring the ENC-H-W* H.264 Encoder Refer to provided documentation for preset configuration settings. The following process may be necessary if

Weitere Dokumente für Computerzubehör Kbc-networks H.264 Encoder

Um das Dokument anzuzeigen Kbc-networks H.264 Encoder Bedienungsanleitung

Kbc-networks H.264 Encoder Bedienungsanleitung (49 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Kbc-networks H.264 Encoder Bedienungsanleitung Seite 1

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Computerzubehör Kbc-networks H.264 Encoder herunter. KBC Networks H.264 Encoder User Manual Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Computerzubehör Kbc-networks H.264 Encoder

Kommentare zu diesen Handbüchern

Kbc-networks H.264 Encoder Bedienungsanleitung Seite 1

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Computerzubehör Kbc-networks H.264 Encoder herunter. KBC Networks H.264 Encoder User Manual Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Computerzubehör Kbc-networks H.264 Encoder

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerzubehör Kbc-networks H.264 Encoder